Commerical Grade Concrete Sealer
UNIQUE® concrete sealer is a commercial grade premium concrete sealer engineered to seal and protect all concrete surfaces.
It is a non-yellowing acrylic polymer ASTM C-309 VOC compliant concrete sealer which does not emit noxious odors or contain volatile organic compounds (VOCs).
A top choice for eco-friendly pavement sealers, it protects both old and new concrete pavement surfaces including commercial parking lots and driveways without the environmental concerns associated with coal tar-based sealers.
Our high-performance concrete sealers are trusted by the pros from small to large-scale concrete sealing projects. UNIQUE® concrete sealer is ideal for both new and aging concrete pavement.
Outperforms Other Concrete Sealers
Developed to work within the concrete, UNIQUE® concrete sealer prevents internal damage while others only form a surface film.
By creating an invisible protective barrier it provides ongoing protection from water damage caused by freeze/thaw cycles, stains from dirt, de-icing salts, oil, and other contaminants.
Some other key benefits:
- Ready-to-use formula
- Simple application with a spray or roller
- Reduction in porosity
- Excellent adhesion to pavement surfaces
- UV resistant
- Breathable
- Slip resistance (even when wet)
- Non-hazardous formula
- Environmentally friendly,water-based formulation
Contact Us Today
Fill out the form below or call us at (800) 441-4880.
UNIQUE® Concrete Sealer Product Data
UNIQUE® Concrete Sealer Product Data Sheet
UNIQUE® Concrete Sealer Safety Data Sheet
UNIQUE® Concrete Sealer Product Bulletin
UNIQUE® Concrete Sealer Packaging Options
- 8 lb.11-gallon bottles
- 38 lb. 5-gallon pails
- 440 lb. 55-gallon drums
How to Apply Concrete Sealer
Pro Tips
To prepare for and begin the application properly, review the following tips:
UNIQUE® Concrete Sealer should not be applied to damp surfaces or when the ambient temperature is expected to drop below 50°F.
Preparation
Also, make sure the concrete surface is free of sticks, dirt, and debris. Power wash the area using a mild detergent to ensure the binding agents work properly.
We recommend removing any driveway stains before starting the sealing process using our KWIK-LOK® Pavement Primer — a fast-curing pavement primer that is specifically designed to lock down oil and chemical stains on concrete before the sealing process.
It prevents bleed-through and helps the pavement sealer bond with the pavement for a stronger hold.
Once the concrete is thoroughly dry, it’s ready for UNIQUE® Concrete Sealer.
- Spray evenly and smoothly
- For multiple coats, allow 2-4 hours between coat applications
- Avoid pools but be sure to efficiently coat
- Night application takes longer than day application
- Remember to give 24 hours between coats
- 24-48 hours are needed for final curing; curing time varies due to ambient conditions. A nighttime application typically takes longer than a daytime application
- For cleanup, clean your sprayer with simple water, making sure to run the water through the sprayer as well as over it
When should I apply concrete sealer?
Concrete sealers can help prevent damage from water, chemicals, UV rays, and other elements. If your concrete is new, you will want to let it cure for at least 28 days before sealing it. If your concrete has been installed for a while, be sure to clean it beforehand to avoid sealing in any dirt, debris, and other materials.
How often should I seal my driveway?
The frequency of your driveway sealing will depend on the type of sealer used, traffic levels, and environmental conditions faced. Most sealers will be reapplied every 1-5 years, but each project is different.
Contact UNIQUE Paving Materials Today to Get Started with Your Concrete Sealing
Contact us today for more information and be sure to check out our other concrete repair and maintenance products.
UNIQUE® is a registered trademark of UNIQUE Paving Materials Corp.